| Task within EtherCAT system |
coupling of EtherCAT Terminals (ELxxxx) to TSN networks |
| Networks |
mode 1: for unmanaged switch networks;
mode 2: for TSN networks (in preparation) |
| Data transfer medium |
Ethernet/EtherCAT cable (min. Cat.5), shielded |
| Distance between stations |
max. 100 m (100BASE-TX) |
| Number of EtherCAT Terminals |
up to 65,534 |
| Type/number of peripheral signals |
– |
| Protocol |
EtherCAT Open Mode |
| Delay |
– |
| Data transfer rates |
100 Mbit/s |
| Configuration |
not required |
| Bus interface |
X001 (RJ45) = 100 Mbit/s Ethernet (TSN); X002 (RJ45) = 100 Mbit/s EtherCAT (EK1100 e.g.) |
| Power supply |
24 V DC (-15 %/+20 %) |
| Input current |
typ. 120 mA + (total E-bus current)/4 |
| Current supply E-bus |
2 A |
| Power contacts |
max. 24 V DC/max. 10 A |
| Electrical isolation |
500 V (power contact/supply voltage/Ethernet) |
| Operating/storage temperature |
-25…+60 °C/-40…+85 °C |
| EMC immunity/emission |
conforms to EN 61000-6-2/EN 61000-6-4 |
| Relative humidity |
95 %, no condensation |
| Vibration/shock resistance |
conforms to EN 60068-2-6/EN 60068-2-27 |
| Protect. rating/installation pos. |
IP20/variable |
| Approvals/markings |
CE |
在線客服
企業微信
點擊圖片查看原圖
[VIP第4年] 指數:1
