Samson薩姆森3963型電磁閥
Intended use
The Type 3963 Solenoid Valve is mounted onto pneumatic linear or rotary actuators
(depending on the version) to control them. Upon failure of the air supply, the solenoid valvevents the actuator, causing the valve to move to the fail-safe position determined by the
actuator. The device is designed to operate under exactly defined conditions (e.g. operatingpressure, temperature). Therefore, operators must ensure that the solenoid valve is only usedin applications where the operating conditions correspond to the technical data. In case
operators intend to use the solenoid valve in other applications or conditions than specified,contact SAMSON.
SAMSON does not assume any liability for damage resulting from the failure to use the de-vice for its intended purpose or for damage caused by external forces or any other externalfactors.
Qualifications of operating personnel
The solenoid valve must be mounted, started up, serviced and repaired by fully trained andqualified personnel only; the accepted industry codes and practices are to be observed. Ac-cording to these mounting and operating instructions, trained personnel refers to individualswho are able to judge the work they are assigned to and recognize possible hazards due totheir specialized training, their knowledge and experience as well as their knowledge of theapplicable standards.
Explosion-protected versions of this device are to be operated only by personnel who has un-dergone special training or instructions or who is authorized to work on explosion-protecteddevices in hazardous areas.
Responsibilities of the operator
The operator is responsible for proper operation and compliance with the safety regulations.Operators are obliged to provide these mounting and operating instructions as well as thereferenced documents to the operating personnel and to instruct them in proper operation.Furthermore, operators must ensure that operating personnel or third persons are not exposed to any danger.
Responsibilities of operating personnel
Operating personnel must read and understand these mounting and operating instructions aswell as the referenced documents and observe the specified hazard statements, warnings
and caution notes. Furthermore, the operating personnel must be familiar with the applicablehealth, safety and accident prevention regulations and comply with them.
了解詳情請點擊：
Samson薩姆森
在線客服
企業微信
點擊圖片查看原圖
[VIP第3年] 指數:4
通過認證 
